HennWeb

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
===== JTL Shop4 Update auf JTL Shop5 =====

<note tip>**Aufgabe**:\\
Erstellen eines Test JTL-Shop5, basierend auf der Kopie eines laufenden JTL-Shop4's
</note>

Eine Update Anleitung gibt es bei JTL unter:\\

https://guide.jtl-software.de/jtl-shop/jtl-shop-kauf-editionen/von-jtl-shop-4-auf-jtl-shop-5-upgraden/\\
 https://guide.jtl-software.de/jtl-shop/jtl-shop-kauf-editionen/jtl-shop-updaten/\\
\\
==== Vorbereitungen ====
  * erstellen einer leeren Testdatenbank (im Backend des Hosters)
  * erstellen eines leeren Testverzeichnisses (z.B. per FTP Programm)
  * erstellen einer Testdomain mit Bezug auf das Testverzeichnis incl SSL (im Backend des Hosters)

  * kopieren der Datenbank  (copy_db.php) s.h. weiter unten
  * kopieren des aktuellen Shops in ein Testverzeichnis (copy_web.php) s.h. weiter unten

==== im neuen Webverzeichnis ====
  * htaccess - alte URL's ausdokumentieren bzw. prüfen und ändern
  * includes/config.JTL-Shop.ini.php - anpassen DB und URLS
  * jetzt sollte der Shop4 als Kopie funktionieren
  * Shop testen - wenn OK dann weiter

==== Vorbereiten für Update auf Shop5 ====
  * Backend Cache ausschalten
  * Backend Plugins löschen / deaktiveren
  * Wartungsmodus aktiveren
  * Evtl. Datenbanken reparieren

==== Shop5 installieren/updaten ====
  * aktuelle Version bei JTL herunter laden und wie von JTL vorgeschrieben die Dateinen daraus entfernen
<code>install (kompletter Ordner)
admin/.htaccess (nur falls Sie diese angepasst haben)
robots.txt (nur falls Sie diese angepasst haben)
shopinfo.xml 
</code>
  * PHP Version des Testshops auf >= 7.3. umstellen und testen (php_test.php) siehe weiter unten
  * JTL Shop5 auf WEB kopieren (z.B. per FTP)
  * JTL Shop5 entpacken (unpacker.php) s.h. weiter unten
  * Cookies für die Domain löschen
  * Im Backend (abgesicherter Modus) anmelden
  * Datenbanken updaten
  * Datenbanken umstellen UTF8
  * Einstellungen prüfen

  * Frontend testen
  * Shop freigeben
  * Testumgebung ggf. mit Passwort sichern


===== Programme =====

==== Datenbank kopieren ====
<code php| copy_db.php>
<?php
/**
 *  kopiert eine existierende Datenbank in eine neue - ACHTUNG !!! - neue Datenbank wird falls vorhanden gelöscht !!!
 */

// Source
$DB_USER_SRC = "<user>";
$DB_PASS_SRC = "<passwort>";
$DB_NAME_SRC = "<dbname>";
 
// Destination
$DB_USER_DEST = "<user>";
$DB_PASS_DEST = "<passwort>";
$DB_NAME_DEST = "<dbname>";
 
// --- ab hier nichts mehr ändern ---

// erstellt eine neue, leere DB. Wenn Sie schon vorhanden ist, wird sie gelöscht.
exec("mysql -u".$DB_USER_DEST." --password='".$DB_PASS_DEST."' -e 'DROP DATABASE IF EXISTS `".$DB_NAME_DEST."`; CREATE DATABASE `".$DB_NAME_DEST."`;'");
 
// kopiert den Inhalt der vorhanden DB in die neue DB
exec("mysqldump -u".$DB_USER_SRC." -p'".$DB_PASS_SRC."' ".$DB_NAME_SRC." | mysql -u ".$DB_USER_DEST." --password='".$DB_PASS_DEST."' ".$DB_NAME_DEST);
</code>

==== WEB kopieren ====

<code php| copy_web.php>
<?php
/**
 * kopiert ein Web Verzeichnis in ein anderes (mit Unterverzeichnissen)
 * source und dest Verzeichnis sollten existieren
 */
 
$source = "<verz>";
$dest =   "<verz>";
 
subdir_copy($source,$dest);
 
function subdir_copy( $source, $dest ) {
 
	echo "<h1>Copy</h1><br>";
	if (!is_dir($source)){
		echo "<b>Error:</b> ".$source." - Verzeichnis nicht gefunden"; 
		return false;
	}
	 if (!is_dir($dest)){
		echo "<b>Error:</b> ".$dest." - Verzeichnis nicht gefunden"; 
		return false;
	}
 
	echo "From : ".$source."<br>";
	echo "To   : ".$dest."<br>";
 
	$shellBefehl = "cp -RvpT $source $dest >>log.txt";
	/**
         * cp Parameter
	 * R rekursiv = mit Unterverzeichnissen
	 * v verbose = vergleichen
	 * p preserve = mode,ownership,timestamps - kopiert mit Rechten
	 * T no-target-directory = keine Zielverzeichnis
	 */

	exec($shellBefehl, $output, $return_var);
	var_dump($output, $retrun_var);
}
</code>


==== PHP Test ====
<code php| php_test.php>
<?php
/**
 * Anzeige des aktuellen PHP Version mit allen Info's
 */
phpinfo();
?>
</code>


==== entpacken ====
<code php| unzipper.php>
<?php
/**
 * The Unzipper extracts .zip or .rar archives and .gz files on webservers.
 * It's handy if you do not have shell access. E.g. if you want to upload a lot
 * of files (php framework or image collection) as an archive to save time.
 * As of version 0.1.0 it also supports creating archives.
 *
 * @author  Andreas Tasch, at[tec], attec.at
 * @license GNU GPL v3
 * @package attec.toolbox
 * @version 0.1.0
 */
define('VERSION', '0.1.0');
$timestart = microtime(TRUE);
$GLOBALS['status'] = array();
$unzipper = new Unzipper;
if (isset($_POST['dounzip'])) {
  //check if an archive was selected for unzipping
  $archive = isset($_POST['zipfile']) ? strip_tags($_POST['zipfile']) : '';
  $destination = isset($_POST['extpath']) ? strip_tags($_POST['extpath']) : '';
  $unzipper->prepareExtraction($archive, $destination);
}
if (isset($_POST['dozip'])) {
  $zippath = !empty($_POST['zippath']) ? strip_tags($_POST['zippath']) : '.';
  // Resulting zipfile e.g. zipper--2016-07-23--11-55.zip
  $zipfile = 'zipper-' . date("Y-m-d--H-i") . '.zip';
  Zipper::zipDir($zippath, $zipfile);
}
$timeend = microtime(TRUE);
$time = $timeend - $timestart;
/**
 * Class Unzipper
 */
class Unzipper {
  public $localdir = '.';
  public $zipfiles = array();
  public function __construct() {
    //read directory and pick .zip and .gz files
    if ($dh = opendir($this->localdir)) {
      while (($file = readdir($dh)) !== FALSE) {
        if (pathinfo($file, PATHINFO_EXTENSION) === 'zip'
          || pathinfo($file, PATHINFO_EXTENSION) === 'gz'
          || pathinfo($file, PATHINFO_EXTENSION) === 'rar'
        ) {
          $this->zipfiles[] = $file;
        }
      }
      closedir($dh);
      if (!empty($this->zipfiles)) {
        $GLOBALS['status'] = array('info' => '.zip or .gz or .rar files found, ready for extraction');
      }
      else {
        $GLOBALS['status'] = array('info' => 'No .zip or .gz or rar files found. So only zipping functionality available.');
      }
    }
  }
  /**
   * Prepare and check zipfile for extraction.
   *
   * @param $archive
   * @param $destination
   */
  public function prepareExtraction($archive, $destination) {
    // Determine paths.
    if (empty($destination)) {
      $extpath = $this->localdir;
    }
    else {
      $extpath = $this->localdir . '/' . $destination;
      // todo move this to extraction function
      if (!is_dir($extpath)) {
        mkdir($extpath);
      }
    }
    //allow only local existing archives to extract
    if (in_array($archive, $this->zipfiles)) {
      self::extract($archive, $extpath);
    }
  }
  /**
   * Checks file extension and calls suitable extractor functions.
   *
   * @param $archive
   * @param $destination
   */
  public static function extract($archive, $destination) {
    $ext = pathinfo($archive, PATHINFO_EXTENSION);
    switch ($ext) {
      case 'zip':
        self::extractZipArchive($archive, $destination);
        break;
      case 'gz':
        self::extractGzipFile($archive, $destination);
        break;
      case 'rar':
        self::extractRarArchive($archive, $destination);
        break;
    }
  }
  /**
   * Decompress/extract a zip archive using ZipArchive.
   *
   * @param $archive
   * @param $destination
   */
  public static function extractZipArchive($archive, $destination) {
    // Check if webserver supports unzipping.
    if (!class_exists('ZipArchive')) {
      $GLOBALS['status'] = array('error' => 'Error: Your PHP version does not support unzip functionality.');
      return;
    }
    $zip = new ZipArchive;
    // Check if archive is readable.
    if ($zip->open($archive) === TRUE) {
      // Check if destination is writable
      if (is_writeable($destination . '/')) {
        $zip->extractTo($destination);
        $zip->close();
        $GLOBALS['status'] = array('success' => 'Files unzipped successfully');
      }
      else {
        $GLOBALS['status'] = array('error' => 'Error: Directory not writeable by webserver.');
      }
    }
    else {
      $GLOBALS['status'] = array('error' => 'Error: Cannot read .zip archive.');
    }
  }
  /**
   * Decompress a .gz File.
   *
   * @param $archive
   * @param $destination
   */
  public static function extractGzipFile($archive, $destination) {
    // Check if zlib is enabled
    if (!function_exists('gzopen')) {
      $GLOBALS['status'] = array('error' => 'Error: Your PHP has no zlib support enabled.');
      return;
    }
    $filename = pathinfo($archive, PATHINFO_FILENAME);
    $gzipped = gzopen($archive, "rb");
    $file = fopen($filename, "w");
    while ($string = gzread($gzipped, 4096)) {
      fwrite($file, $string, strlen($string));
    }
    gzclose($gzipped);
    fclose($file);
    // Check if file was extracted.
    if (file_exists($destination . '/' . $filename)) {
      $GLOBALS['status'] = array('success' => 'File unzipped successfully.');
    }
    else {
      $GLOBALS['status'] = array('error' => 'Error unzipping file.');
    }
  }
  /**
   * Decompress/extract a Rar archive using RarArchive.
   *
   * @param $archive
   * @param $destination
   */
  public static function extractRarArchive($archive, $destination) {
    // Check if webserver supports unzipping.
    if (!class_exists('RarArchive')) {
      $GLOBALS['status'] = array('error' => 'Error: Your PHP version does not support .rar archive functionality. <a class="info" href="http://php.net/manual/en/rar.installation.php" target="_blank">How to install RarArchive</a>');
      return;
    }
    // Check if archive is readable.
    if ($rar = RarArchive::open($archive)) {
      // Check if destination is writable
      if (is_writeable($destination . '/')) {
        $entries = $rar->getEntries();
        foreach ($entries as $entry) {
          $entry->extract($destination);
        }
        $rar->close();
        $GLOBALS['status'] = array('success' => 'Files extracted successfully.');
      }
      else {
        $GLOBALS['status'] = array('error' => 'Error: Directory not writeable by webserver.');
      }
    }
    else {
      $GLOBALS['status'] = array('error' => 'Error: Cannot read .rar archive.');
    }
  }
}
/**
 * Class Zipper
 *
 * Copied and slightly modified from http://at2.php.net/manual/en/class.ziparchive.php#110719
 * @author umbalaconmeogia
 */
class Zipper {
  /**
   * Add files and sub-directories in a folder to zip file.
   *
   * @param string     $folder
   *   Path to folder that should be zipped.
   *
   * @param ZipArchive $zipFile
   *   Zipfile where files end up.
   *
   * @param int        $exclusiveLength
   *   Number of text to be exclusived from the file path.
   */
  private static function folderToZip($folder, &$zipFile, $exclusiveLength) {
    $handle = opendir($folder);
    while (FALSE !== $f = readdir($handle)) {
      // Check for local/parent path or zipping file itself and skip.
      if ($f != '.' && $f != '..' && $f != basename(__FILE__)) {
        $filePath = "$folder/$f";
        // Remove prefix from file path before add to zip.
        $localPath = substr($filePath, $exclusiveLength);
        if (is_file($filePath)) {
          $zipFile->addFile($filePath, $localPath);
        }
        elseif (is_dir($filePath)) {
          // Add sub-directory.
          $zipFile->addEmptyDir($localPath);
          self::folderToZip($filePath, $zipFile, $exclusiveLength);
        }
      }
    }
    closedir($handle);
  }
  /**
   * Zip a folder (including itself).
   * Usage:
   *   Zipper::zipDir('path/to/sourceDir', 'path/to/out.zip');
   *
   * @param string $sourcePath
   *   Relative path of directory to be zipped.
   *
   * @param string $outZipPath
   *   Relative path of the resulting output zip file.
   */
  public static function zipDir($sourcePath, $outZipPath) {
    $pathInfo = pathinfo($sourcePath);
    $parentPath = $pathInfo['dirname'];
    $dirName = $pathInfo['basename'];
    $z = new ZipArchive();
    $z->open($outZipPath, ZipArchive::CREATE);
    $z->addEmptyDir($dirName);
    if ($sourcePath == $dirName) {
      self::folderToZip($sourcePath, $z, 0);
    }
    else {
      self::folderToZip($sourcePath, $z, strlen("$parentPath/"));
    }
    $z->close();
    $GLOBALS['status'] = array('success' => 'Successfully created archive ' . $outZipPath);
  }
}
?>
 
<!DOCTYPE html>
<html>
<head>
  <title>File Unzipper + Zipper</title>
  <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  <style type="text/css">
    <!--
    body {
      font-family: Arial, sans-serif;
      line-height: 150%;
    }
    label {
      display: block;
      margin-top: 20px;
    }
    fieldset {
      border: 0;
      background-color: #EEE;
      margin: 10px 0 10px 0;
    }
    .select {
      padding: 5px;
      font-size: 110%;
    }
    .status {
      margin: 0;
      margin-bottom: 20px;
      padding: 10px;
      font-size: 80%;
      background: #EEE;
      border: 1px dotted #DDD;
    }
    .status--ERROR {
      background-color: red;
      color: white;
      font-size: 120%;
    }
    .status--SUCCESS {
      background-color: green;
      font-weight: bold;
      color: white;
      font-size: 120%
    }
    .small {
      font-size: 0.7rem;
      font-weight: normal;
    }
    .version {
      font-size: 80%;
    }
    .form-field {
      border: 1px solid #AAA;
      padding: 8px;
      width: 280px;
    }
    .info {
      margin-top: 0;
      font-size: 80%;
      color: #777;
    }
    .submit {
      background-color: #378de5;
      border: 0;
      color: #ffffff;
      font-size: 15px;
      padding: 10px 24px;
      margin: 20px 0 20px 0;
      text-decoration: none;
    }
    .submit:hover {
      background-color: #2c6db2;
      cursor: pointer;
    }
    -->
  </style>
</head>
<body>
<p class="status status--<?php echo strtoupper(key($GLOBALS['status'])); ?>">
  Status: <?php echo reset($GLOBALS['status']); ?><br/>
  <span class="small">Processing Time: <?php echo $time; ?> seconds</span>
</p>
<form action="" method="POST">
  <fieldset>
    <h1>Archive Unzipper</h1>
    <label for="zipfile">Select .zip or .rar archive or .gz file you want to extract:</label>
    <select name="zipfile" size="1" class="select">
      <?php foreach ($unzipper->zipfiles as $zip) {
        echo "<option>$zip</option>";
      }
      ?>
    </select>
    <label for="extpath">Extraction path (optional):</label>
    <input type="text" name="extpath" class="form-field" />
    <p class="info">Enter extraction path without leading or trailing slashes (e.g. "mypath"). If left empty current directory will be used.</p>
    <input type="submit" name="dounzip" class="submit" value="Unzip Archive"/>
  </fieldset>
  <fieldset>
    <h1>Archive Zipper</h1>
    <label for="zippath">Path that should be zipped (optional):</label>
    <input type="text" name="zippath" class="form-field" />
    <p class="info">Enter path to be zipped without leading or trailing slashes (e.g. "zippath"). If left empty current directory will be used.</p>
    <input type="submit" name="dozip" class="submit" value="Zip Archive"/>
  </fieldset>
</form>
<p class="version">Unzipper version: <?php echo VERSION; ?></p>
</body>
</html>
Contact GitHub API Training Shop Blog About
© 2017 GitHub, Inc. Terms Privacy Security Status Help
</code>